Looking for:
Tekla structures 2017 sp6 free |
Tekla structures 2017 sp6 free - Main navigation
- Tekla structures 2017 sp6 free
The latest Tekla Structures service pack and updated environment installers are available in Tekla Downloads. Rectangular column reinforcement 83 : Side bars 1 now have the correct bending radius. Previously, the Up direction was set to Auto and Tekla Structures displayed a message that the top-in-form face was not set.
Concrete console : Previously, rebar sets could be copied from the input part when you made any changes to the component. This issue has now been fixed. Mesh bars by area : When applying side distances for rebars, the same shape area is now always reinforced in the same manner, regardless of the polygon settings. Sandwich wall window : Duplicate cut parts are not created in the top detail anymore. Corbel reinforcement 81 : For double corbels, when the Follow shape setting was set to tekla structures 2017 sp6 free, the main bar creation started at the wrong height.
Wall rails 1 : The top bracket is not duplicated anymore when using a component to create a bracket. Joining plates 14 : Previously, welds between the stiffeners and the main or secondary part were not created. Welded to top flange : Previously, welds number 8 and 9 were not created at all. No paint area : Previously, when you loaded a surface treatment attribute file in the No paint area tool, tekla structures 2017 sp6 free depth offset was not displayed correctly in the US imperial environment.
Column with stiffeners : Previously, an incorrect gap was created between the shear tab and the main part when doubler plates were created. Bolted gusset 11Tube gusset 20Gusseted cross 62Bolted gusset tekla structures 2017 sp6 free Previously, one of the gusset chamfers was not created in the correct position. CMF Cold rolled cleat : The dimensioning of the bolted non-riveted window trimmer cleat was fixed. Column splice : Previously, when using angle cleats and division plates, some bolts were not created correctly.
Tube crossing 22 : Previously, end plates were placed incorrectly when the secondary part was sloped. Ayrshire Cold rolled sleeved : Previously, when switching between a standard sleeve and a firewall condition, the component was not created. Wraparound gusset 60 : Previously, weld 1 was changed from workshop weld to site tekla structures 2017 sp6 free in some cases.
Kingspan File transfer 18 : Previously, the CAM data for the counterformed tekla structures 2017 sp6 free ignored the bolt direction and always put them as Counterformed in.
Kingspan Standard tie bay 10 : Previously, rails drawn in the same direction affected the direction of the counterform.
CMF Cold rolled sleeved : Previously, a single-sided stay removed the bolt from the opposite side. Previously, when you added manually created stanchions and Railings 77 component to a custom component and used the Default or Use all stanchion selection option, Tekla Structures might have stopped working unexpectedly, depending the content of the custom component.
This has now been fixed. We recommend to use the Use selected option in the case when all selected stanchions are to be used, even though in a well-define case the Default option produces identical results. Earlier, when you added End plate connection between a column main part and Girder S94 secondary partTekla Structures stopped working and you had to restart it.
Layout manager now supports Export Field Link files. IFC2x3 export : The export consumed excess amount of memory on each export without releasing it. Only reopening Tekla Structures released the memory. This issue tekla structures 2017 sp6 free now перейти на источник fixed, and the export no longer consumes excess amount of memory. Trimble Connector : PDF file attachments could not be opened in the Trimble Connector dialog box unless they had first been downloaded to the local computer by some other means, such as using Trimble Connect Desktop.
Now double-clicking the PDF file attachment in the Tekla structures 2017 sp6 free Connector ToDos dialog box will initiate the file download if necessary, and open the file in an associated viewer or browser. This option exports the model relative tekla structures 2017 sp6 free the current work plane coordinate system. IFC4 export : The curved beam export sometimes produced incorrect geometry.
Trimble Connector : When exporting a model from Trimble Connector, sometimes the folder path could not be retrieved correctly from the Europe server. Trimble Connector : The overlay models are now listed in the Trimble Connector dialog box when the collaboration is started.
Base points : You can no longer save a base point without узнать больше здесь a name for the base point. Template Editor : When you select a content /11806.txt in the Select Content Type dialog box after adding a row in Template Editor, the options in the list are now also sorted alphabetically in the translations.
Previously, they were sorted correctly in English only. Now the optimization is only applied to the marks that have the Placing method value Free. In practice, this prevents the optimization from moving manually moved marks, because moving a mark manually changes the value of its Placing method to Fixed. Rebar marks : Sometimes, when there was no frame around the reinforcement mark, and tekla structures 2017 sp6 free was a circular frame around one of the mark elements, and you dragged the mark, the circular frame had a strange behavior: the frame was on top of the leader line in one end and moved slowly to the middle of the leader line in the other end.
Rebar marks : Earlier, when you used the One leader line per row option for rebar marks, tekla structures 2017 sp6 free the row was slanted, the mark might not be connected to the best side. Rebar marks : Earlier, when you created a rebar mark with the One leader line per row option for rebars along arc, a leader line with a partial zig zag shape was created.
Rebar marks : A rebar mark that was created with applied properties did not work correctly on update. /43933.txt manager : The document selections that you make in Document manager are now kept during the multi-user save. Rebar marks : Earlier, showing the minimum length and maximum length for a tapered rebar group in a reinforcement mark was tekla structures 2017 sp6 free taking into account the rebars inside the drawing view boundary.
This issue has now been fixed, and these parameters now show the minimum and maximum length within the rebar group, irrespective of the drawing view boundary. Drawing texts : Earlier, the Background mask setting in Text properties did not follow toggle check box changes.
Previously, using the Save as command did not sometimes work correctly if the original model was created in Tekla Structures or older. Previously, in Tekla Model Sharing, the read in icon was deactivated in some cases when the user with tekla structures 2017 sp6 free Viewer role and the Project Viewer license read in more than one package. When a Tekla Model Sharing user has the Project viewer role, Tekla Tekla structures 2017 sp6 free now prevents modifications which would later cause the write out to be rejected, such as grid modifications.
Previously, if you modified a selection filter and clicked Apply or OK in the Selection Filter dialog box, standard was shown instead of blank for the applied selection filter on the Selecting toolbar. Previously, the direct modification commands tekla structures 2017 sp6 free working when you used the Enter key to complete numeric input. This has now been fixed, and using the Enter key to complete the numeric input does not end the direct modification commands anymore. Previously, the Tekla structures 2017 sp6 free command did not work as expected.
This has now been fixed, and Undo works again. When objects. Sometimes when multi-user models were saved, the length of some bolts might have changed. Sometimes, Tekla Structures might have stopped working when objects were copied or moved to another object in the model. This does not happen anymore. Previously, Tekla Structures process stayed running in the background when Tekla Structures was closed while a command was active. Non-geometrical updates, such as changing the bolt type from Site to Workshopnow mark bolts as modified.
This issue has now been tekla structures 2017 sp6 free, and the BO block for such holes is always created on the back profile face. Export Unitechnik 79 : Previously, some tekla structures 2017 sp6 free bars copied from an existing braced girder were recognized as braced girders.
This issue has now been fixed, and only elements specified by class or by name are recognized as braced girders. Export Unitechnik 79 : If a contour polygon contains edges shorter than 10 mm, a notification will be added in the Unitechnic log file.
Export Unitechnik 79 : Previously, the Z coordinate of the electric tubes was not exported at all. Skip to main content. Development area - Any - Import, export, interoperability concrete Concrete components Import, export, interoperability steel Core Drawings Import, export, interoperability Modeling Numbering Tekla structures 2017 sp6 free components System and options Tekla Model Sharing Templates and reports.
TSAC Concrete components Concrete console : Previously, rebar sets could be copied from the input part when you made any changes to the component. TSAC Concrete components Mesh bars by area : When applying side distances for rebars, the same shape area is now always reinforced in the same manner, regardless of the polygon settings.
TSAC Concrete components Corbel reinforcement 81 : For double corbels, when the Follow shape setting was set to horizontal, the main bar creation started at the wrong height.
TSAC Steel components Wall rails tekla structures 2017 sp6 free : The top bracket is not duplicated anymore when using a component to create a bracket. TSAC Steel components Joining plates 14 : Previously, welds between the stiffeners and the main or secondary part were not created.
TSAC Steel components No paint area : Previously, when you loaded a surface treatment attribute file in the No paint area tool, the depth offset was not displayed correctly in the US imperial environment. TSAC Steel components Column with stiffeners : Previously, an incorrect gap was created between the shear tab and the main part when doubler plates were created.
TSAC Steel components Bolted gusset 11 tekla structures 2017 sp6 free, Tube gusset 20Gusseted cross 62Bolted gusset : Previously, one tekla structures 2017 sp6 free the gusset chamfers was not created in the correct position.
TSAC Steel components Column splice : Previously, when using angle cleats and division plates, some bolts were not created correctly. TSAC Steel components Tube crossing 22 : Previously, end plates were placed incorrectly when the secondary part was sloped.
TSAC Steel components Ayrshire Cold rolled sleeved : Previously, when switching between a standard sleeve and a firewall condition, the component was not created. TSAC Steel components Wraparound gusset 60 : Previously, weld 1 was changed from workshop weld to site weld in some cases. TSAC Steel components Kingspan Standard tie bay 10 : Previously, rails drawn in the same direction affected the direction of the counterform. TTSD Steel components Previously, when you added manually created stanchions and Railings 77 component to a custom component and used the Default or Use all stanchion selection option, Tekla Structures might have stopped working unexpectedly, depending the content tekla structures 2017 sp6 free the custom tekla structures 2017 sp6 free.
TTSD Steel components Earlier, when you added End plate connection between a column main part and Girder S94 secondary partTekla Structures stopped working and you had to restart it. TTSD Import, export, interoperability Trimble Connector : PDF file attachments could not be opened in the Trimble Connector dialog box unless they had first been downloaded to the local computer by some other means, such as using Trimble Connect Desktop.
TTSD Import, export, interoperability Trimble Connector : When exporting a model from Trimble Connector, sometimes the folder path could not be retrieved correctly from the Europe server. TTSD Import, export, interoperability Trimble Connector : The overlay tekla structures 2017 sp6 free are now listed in the Trimble Connector dialog box when the collaboration is started.
TTSD Import, export, interoperability Base points : You can no longer save a base point without giving a name for the base point. TPLED Templates and reports Template Editor : When you select a content type in the Select Content Type dialog box after adding a row in Template Editor, the options in the list are now also sorted alphabetically in the translations.
TTSD Drawings Rebar marks : Sometimes, when there was no frame around the reinforcement mark, and there was a circular frame around one of the mark elements, and you dragged the mark, the circular frame had a strange behavior: the frame was on top of the leader line in one end and moved slowly to the middle of the leader line in the other end. TTSD Drawings Rebar marks : Earlier, when you used the One leader line per row option for rebar marks, and the row was slanted, the mark might not be connected to the best side.
TTSD Drawings Rebar marks : Earlier, when you created a rebar mark with the One leader line per row option for rebars along arc, a leader line with /28002.txt partial zig zag shape was created. TTSD Drawings Rebar marks : A rebar mark that was created with applied properties did not work correctly on update. TTSD Drawings Document manager : The tekla structures 2017 sp6 free selections that you make in Document manager are now kept during the multi-user save.
TTSD Drawings Rebar marks : Earlier, showing the minimum length and maximum length for a tapered rebar group in a reinforcement mark was only taking into account the rebars inside the drawing view boundary. TTSD System and options Previously, using the Save as command did not sometimes work correctly if the original model was created in Tekla Structures or older.
TTSD Modeling Previously, if you modified a selection filter and clicked Apply or OK in the Selection Filter dialog box, standard was shown instead of blank for the applied selection filter on the Selecting toolbar.
TTSD Modeling Previously, the direct modification commands stopped working when you used the Enter key to complete numeric input.
❿
Comments
Post a Comment